When you walk into a room to do something, do you ever have to double-check to make sure the light is on? If so, you’re living with a problem called light bulb burnout.
Light bulbs burning out prematurely happens a lot. It costs Americans millions of dollars each year.
So, are you wondering how to deal with a light bulb blows out immediately? Keep reading to learn more!
Loose Connections
Loose connections in light bulb fixtures can cause them to burn out instantly. It can be a sign of improper installation or poor socket design. Checking for a loose connection is relatively simple.
Remove the bulb and unscrew the fixture socket. Carefully inspect for any signs of abnormality, such as a loose wire, a disconnected or misconnected ground wire, or corrosion.
If found, tighten or replace the connections as needed. If the problem appears to be related to the socket itself, replace it with one of higher quality or install a wire guard to prevent excessive vibrations.
Additionally, use a higher-wattage bulb or a specialized heat-resistant bulb that stands up to vibration better. This way, you can enjoy higher-quality lighting and a longer lifespan from your light bulbs.
Cheap Light Bulbs
Cheap light bulbs can be great for saving money. However, it can sometimes mean you must deal with light bulbs that burn out instantly. A common way to deal with this problem is to invest in a quality light bulb with a longer lifespan.
Lamps with burning-out bulbs can be a safety hazard and consume more energy than necessary. Finding the right vendor to ensure quality products is crucial. It’s also essential to read the instructions for the light bulb to ensure it fits the intended appliance correctly.
Make sure to check that the socket’s wattage, voltage, and shape are correct. Check the electrical system to which the bulb is connected since a loose connection or short circuit could also be causing the bulb to burn out.
Mechanical Vibration
This vibration can cause the filament inside the bulb to break, resulting in a fast burning-out of the light. To prevent this, ensure the equipment is adequately supported to reduce the impact of the vibrations. This might include using mounting brackets, shock absorbers, or widening/relocating contact points to soften the vibration.
If possible, move the equipment away from the lights, as the vibrations in the air may also affect the lights. To further reduce the risk of light bulbs burning out due to mechanical vibration, use higher-wattage bulbs that are more capable of withstanding vibrations. Inspect the wiring regularly to ensure nothing is loose or damaged.
High Voltage
This can be frustrating for anyone trying to light up a dark room or area. You can do a few things to help ensure this doesn’t happen again. You should invest in higher-quality bulbs that are designed to last longer.
You should also check the bulb’s voltage to ensure it is correctly rated for the area you want to use. Finally, if the problem persists, you may need a qualified electrician to check the wiring or the circuit itself, as this could be a sign of a higher voltage problem.
Taking the time to determine the cause of the issue and addressing it can help ensure that your bulbs will last much longer, saving you both time and money in the long run.
Depressed Socket Tab
This is a tab due to excess voltage, which causes the light bulb’s filament to overheat and become too hot to sustain. This results in a short burn, leaving the bulb burnt out and gone in the blink of an eye.
It’s essential to ensure that any exposed wiring is adequately insulated and the socket is well maintained, ensuring that when this tab is present, it’s not in contact with other metal surfaces.
Once that is done, regularly cleaning the outlet and the bulb can ensure that any dirt, dust, or other particles don’t make their way into the socket and cause issues. Lastly, finding the correct size of light bulbs for each fixture can avoid putting too much strain on the socket. With these simple steps, you can avoid burning out your light bulbs in the blink of an eye.
Short Circuit
Knowing the typical life of a bulb is about a year can add to the frustration. A short circuit can often cause this. This happens when there is a disruption in the electrical flow.
It can also be caused by faulty wiring or excess voltage running through the light. It is best to turn it off immediately, and if the bulb is visibly damaged, unplug the lamp or fixture for safety reasons.
If possible, replace the faulty wiring and ensure the voltage is correct. After this, the bulb can be safely and adequately replaced. A qualified electrician best does this as it can be dangerous.
Taking the proper steps to deal with this issue can ensure that the light fixture will last for its intended use.
Wrong Type of Dimmer Switch
When a dimmer switch is used with sure light bulbs, the voltage shoots up to a dangerously high level and can cause the light bulb to burn out.
Always check the manufacturer’s instructions before buying one to ensure you use the correct dimmer switch. If you’re using a dimmer switch that is not designed to be compatible with a specific type of light bulb, it can cause the light bulb to collapse and burn out instantly.
So if you are experiencing multiple light bulbs blowing, be sure to contact Your Electrical Expert for emergency electrical assistance.
Follow This Guide When Light Bulb Blows Out Immediately
Deciding how to deal with a light bulb blows out immediately is tricky, but it doesn’t need to be. For best results, use a matching wattage and voltage, clean the socket, and replace the bulb directly. It may be time to turn to professionals when that doesn’t work.
So, don’t delay. Contact the best electrician now!
Did you find this article interesting? Check out the rest of our site today!
